Does it matter if I use Digital or Analog phone services

General technical details of telephone line Surprisingly, a telephone is one of the simplest devices you have in your house. It is so simple because the telephone connection to your house has not changed in nearly a century. If you have an antique phone from the s, you could connect it to the wall jack in your house and it would work fine! Plain old telephone systems POTS telephone line consits of one wire pair which carries full duplex audio and the operating current for the telephone. The telephone connected to line is powered from current limited 48V power source, so phones on-hook, should measure around 48 volts DC. Practically the opearating voltages of telephone systems can vary from 24V to 60V depending on the application, although 48V nominal voltage is the most commonly used. Telephone applications often require and use positive grounding in the central office, where the positive conductor of the 48V power supply is connected to earth ground. The telecommunication industry began the positive ground convention in the s and many telecomm companies still employ the traditionally positive grounded system.

How do I hook up a telephone jack on the wall

Click here for other telephone recording devices Here’s a short video that demonstrates how to use a few of the methods featured above: Here’s a small device that plugs into your iPhone or Android smartphone and records the phone calls onto any recording device, such as a digital voice recorder or your laptop computer. Since both Apple and Google are reluctant to provide telephone conversation recording software in their app stores, this is probably the best solution for recording on a smart phone.

Click here to order this device from recapmycalls. Using this device is probably the best way that you can record your cellular phone calls.

Rj telephone wiring up as used in your router, yellow wafers that should connect to my old telephone with the pure direct connection scenarios. Asked several wired as follows: if the house, meaning anyone can send a multiple pcs in accordance with 8 phone jack.

At first glance all the colored wires associated with your telephone wiring may seem confusing. Although there is an industry standard for use of the colored conductors, the truth is any two conductors regardless of their color will work as long as the same two are hooked up at each end. Having said that I do recommend that whenever it is possible, stay with the industry standard color code. Standard Telephone Wiring Color Code.

There is a possibility of two color codes that you may find in your home, I will cover both of them but only up to a 4 pair cable which consists of 8 conductors. The cable in your home may consist of only 2 pairs, 3 pairs or may be a 4 pair cable. Even though larger cables are made, it is unlikely that you would find them in your home. Color Code One is the old solid color code. Not used in new installations anymore. Each pair can be used as a phone line, so in this example you can use this cable for up to four phone lines.

The primary color of the conductor is the first color listed, the second color is the tracer.

How do I hook up a phone jack when the colors do not match

Telephone Circuits Telephone In-Use Indicator When a new computer modem enters the household, the demands on the home phone line skyrockets. The Internet surfer can use phone time on a par with the most talkative teenager. And the computer modem user can be quite sensitive about his privacy: The phone wiring may be modified so that the modem is always in control by connecting the phone line directly to the modem and connecting the rest of the phones to the modem’s “phone” jack.

But this solution gives the computer user too much power over the phone line and it doesn’t solve the problem if two computers share a single line. Here is a simple blinking LED circuit which will alert users when the line is in use before the receiver is lifted.

Phone jack installation is one of the few basic wiring jobs homeowners can do. Home automation applications may include installing phone extensions in additional rooms or .

If you want to share a phone line, this is the easiest way! Keep in mind that this device will let you share phone lines for both incoming and outgoing calls, but they have no way of routing incoming calls. That means that only one of the devices should be allowed to automatically answer the line! We get lots of calls from people wanting Line In-Use indicators, so they know when the modem or phone is in-use and they don’t interrupt the call when making an outbound call.

These devices work on the Voltage Drop principal! The Privacy Devices are placed in front of each phone or modem, and know that the line is busy off-hook if the voltage drops below a threshold of 24VDC. If the talk battery is below 24V, the device won’t conduct electricity so the phone won’t be able to pick up the line. You can’t use these on very long cable runs because the voltage doesn’t drop much on the other run when you go off hook.

If the voltage doesn’t drop below the threshold of the Privacy Device, the Privacy Device won’t exclude. Keep these facts in mind when using these: They must be put in front of each device that you want to be excluded from the line when it is busy you can’t just put it in front of the phone you don’t want interrupted.

You can’t put two of these in-series! Some Credit Card Terminals and other devices already have these built-in, so if you can’t use a Privacy Device on these terminals can’t put two in-series. The telephones or other devices have to be within a couple of hundred feet of one another.

Do it yourself home telephone wiring

By Brother Nathanael Kapner Copyright There are so many unanswered questions regarding the Sandy Hook killings that it not only boggles the mind but inspires anger and legitimate outrage. Even Lieutenant Paul Vance, head of the Connecticut State Troopers, admits that much information surrounding the crime is being withheld. But there also some issues that we need to keep the cards close to the chest.

I have compiled dates and events from several sources, both online and paper documents. Even though I found a couple of conflicts between sources over exact dates, for .

My advice here is aimed towards connecting both your existing line Line 1 and your new second line Line 2 on new or existing jacks at the locations of your existing jacks. This will provide you the most flexibility in determining how to use your expanded phone service. This advice is only applicable if your phone cable is normal station cable with two or more pairs of wire.

Most people will be able to add a second line to their existing jacks without installing any additional cable. Two wires one “pair” are needed for most phone line connections. Normal station cable what your phone tech may call “JK” used for residential installations has four wires two “pair”. Single line installations only use one pair, leaving the second pair available for the second line. You may find that your home was originally wired with both pairs connected to the jacks and is essentially “two-line ready”.

If you plan to “do it yourself”, I recommend you consider accomplishing all of your rewiring before actually ordering your second line from the phone company.

How to Hook Up a Fax Machine

On the back of phone jacks, there are usually four connections—one red, one green, one black, and one yellow. The red and green “Christmas trees” wires power the first, or primary, line in your home. The black and yellow “bumble bees” wires don’t get used unless a second line is added to your home. Adding a second line to your home is an easy task that even the least experienced do-it-yourselfer can do without costly interference from a telephone technician.

First, let’s look a few scenarios where someone may need a second line in their home:

Telephone Line Simulators (Click on image above for close-up view) Teltone model TLS What is a telephone line simulator? You could think of it as a very small telephone central office; a small phone company in a box!The one shown above is an example of such a device (Teltone model TLS-4) and is the one I recently purchased used (can’t afford a new one!).

I have a newer house and when they built the house they ran cat5 cable to all the phone outlets in the house. The housing has a media center in the master bedroom closet. So it appears they used the cat5 cable as phone cables and only used 4 of the wires of the cat5 cables. So now I have dsl intenet with direct tv satelite. In order for me to watch on demand on my direct tv they recievers need to be hooked up to the internet.

I am wanting to put the dsl modem in that media center and then just run ethernet cables from the wall to the recievers. Okay I know all that may sound confusing. I need to hook a 4 pin phone cable from the media center to the modem, then I can hook up my cat5 cables that are already ran through out the house to the modem. So on this circuit board i can add another phone line and hook that to my modem. Or I can just take the input phone line and add a 4 pin connector to the wires and hook that to my modem.

How do I split one telephone jack into two

By hooking your laptop up to your TV, you can turn it into a media center, streaming your favorite Netflix and Hulu content, as well as playing YouTube videos and any media stored on your laptop. You can play games on the big screen, or edit a document without straining your eyes. Follow this guide to get your laptop hooked up to your TV. Steps Connection Basics 1 Determine which video output port s your laptop has.

There are several possible types; your laptop may have more than 1.

: 1-LINE On/Off Switch for Any Telephone Device connected to a 1-line RJ Phone Jack. The Telephone Remote Interrupt Control Kit 1. The “TRICK 1”. Amazon Exclusive, from Grandpa and Granny Co.!: Corded Telephones: Office Products.

Does it matter if I use Digital or Analog phone services? YES, it does matter. To protect your equipment from damage and guarantee best performance, be sure to follow proper connection and usage guidelines. The following is true regarding plugging any TTY into a telephone line in a home or office, i. Most telephone lines coming into homes are analog. TTYs can be plugged into any standard phone jack in your home.

Often, these office telephone systems can also provide an “analog” port or jack connection within the system. Sometimes workstations have two phone jacks, one to connect the office telephone to the digital system and the other for an analog connection. It is possible that one of these jacks may be used to connect a fax machine or modem, which may also use analog connections. In hotels, an analog phone jack is sometimes provided on the side of a hotel telephone.

Individuals use this analog connection to plug in their laptop computers. This same jack can be used to directly connect your TTY. If this analog jack is not available you can still use the TTY acoustically by placing the telephone handset on the cups.


See Article History Alternative Title: The telephone is inexpensive, is simple to operate, and offers its users an immediate, personal type of communication that cannot be obtained through any other medium. As a result, it has become the most widely used telecommunications device in the world. Billions of telephone sets are in use around the world. Alexander Graham Bell, who patented the telephone in , inaugurating the 1, km mile telephone link between New York City and Chicago on October 18, In addition it describes the development of what is known as the public switched telephone network PSTN.

On your end, if you hook up your own jack, you will need to connect the wire with the most BLUE to the RED screw in the jack and the wire with the most WHITE to the GREEN screw.

You can connect both devices using a single phone line or separate lines for each device. Regardless of which option you choose, you must pay close attention to the jacks located on the back of the fax machine to ensure proper cable placement. However, this does not guarantee you can use both devices at the same time. Sometimes this jack features an icon of a cable going into a wall jack as the label rather than the written word.

You then connect one end of a second cable into the wall jack for your telephone line and the other end of the cable into the jack on your telephone. Sometimes this jack features an icon of a telephone rather than the written word.

Telephone Adapters

Quite simply, that is what VoIP can do for you. Connecting to a newer phone company’s network directly via the Internet instead of by dedicated copper wire , providing you with a device which provides phone service a dial tone. You just plug your new VoIP device into a spare port on the router connected to your Internet modem.

Lifewire how do have a telephone jack and the call your router/modem if there any pair of once you hook up the appropriate hardware store. 20, details in korea jack which plugs, ecompatible, is any wall of the fax machine.

April 9, istock If you’ve grown up with smartphones, you’ve probably never carried around a tiny personal phone book to keep track of all your various contacts. What other aspects of old-school telephony do you remember that would absolutely stump younger readers? Busy Signal As a rule, these days if a person is currently engaged on their telephone, any incoming calls will be automatically bounced to some sort of voicemail system. There are not only consumers today who have become so unaccustomed to being thwarted by the stentorian tones of a busy signal that they are temporarily flummoxed at the concept of having to hang up and dial again later, there are also younger users who have never heard a busy signal.

If you’re one of those people, take a listen to the video above. In fact, it happened often enough that the telephone company had a special tone to alert customers that their phone was off the hook. Party Lines Party lines were very common in the first half of the 20th century, especially in rural areas and during the war years, when copper wire was in short supply. A party line was a local telephone loop circuit that was shared by more than one subscriber.

Connecting a Cat5 cable to a phone cable

Doing your own telephone wiring Note: I’m not familiar with the phone wiring conventions outside the U. In years gone past, it was the responsibility of the phone company not only to bring phone service to your house but to do the phone wiring within your house as well. This is no longer the case.

Do I hook up all the reds/green to their corresponding color in the jack and go-OR do I have to do something at the outside box. (I have already figured out which connection outside is the working line.).

Next It only takes two wires to connect a phone , but most house wiring contains four wires. The red and green wires are on the two center terminals of a normal phone jack, and the black and yellow wires are on the two outer terminals. This arrangement allows most normal houses to handle two phone lines very easily. Many if not most line cords that you receive when you purchase a phone to go between the wall jack and the phone only have the two center wires.

To save money, the outer two are omitted. When you bring a second phone line into the house, this new line uses the yellow and black wires. If you have a two-line phone , then the phone is normally ready to accept the second line automatically on the yellow and black wires. You plug one line cord into the phone and it splits the two lines inside the phone. Make sure that the line cord between the jack and the phone actually contains all four wires!

How to Install A Phone Line